Start-Up And Operation - Klarstein 10033399 Handbuch

START-UP AND OPERATION

Before first Use
• Remove the grill from the packaging and remove all packaging materials.
• Rub the appliance with a clean and damp cloth to remove any dust.
• Dry the appliance thoroughly afterwards.
• Do not use aggressive or abrasive cleaning agents to clean the appliance.
• Place the unit on a dry and stable surface at a safe distance from open flames and
stoves.
• This appliance requires 1500 watts and should be the only appliance within a
circuit.
• Only plug the appliance into a 220 - 240 V/ 50 Hz AC outlet.
• Prepare the non stick surface before using the grill for the first time. Spread 2
teaspoons of olive oil with a soft cloth or kitchen paper over the entire grill surface.
• Mount the grill and turn the temperature to medium. Turn the grill off when it reaches
the set temperature and allow it to cool completely.
• The grill can now be used.
• Following the above guidelines, we recommend a „test run" at high temperature to
remove any protective substances or oils used for packaging and shipping.
• Set the temperature control to Sear and the fan on/off switch to On to start trial
operation.
• Allow the grill to run for 20 minutes. A small amount of smoke and odor may occur.
This is normal.
EN
15