Klarstein 10033399 Handbuch Seite 16

EN
16
Operation
1. Place the appliance on a stable, flat level surface such as a countertop or table.
2. Make sure the Grill is assembled with Grill Plate, Heating Element, Insulation
plate,water tray, fans in place.
Note: Never plug the Grill in without all parts
placed probably. The Water Tray must be filled
with some water .
3. Plug the cord into a 220-240V volt 50Hz/ 60Hz AC only outlet, LED light on.
4. Press the "POWER"Button, fans working.
5. Press the "Adjust upward arrow" Button, heating element working , the temperature
change from 120 °C, 160 °C,180 °C , 200 °C ,230 °C. If press " Adjust Down
arrow" Button, temperature change from 230 °C to 120 °C, you can set the
temperature aocording to foods requirement. "Keep Warm" point temperature
(80-100 °C)
6. Place food to be roasted on Grill Plate. Turn food once during grilling unless
otherwise directed.
7. If desired, brush with barbecue or other sauce during last 5 to 10 minutes of grilling.
8. When grilling the foods , it is about 10 minutes after starting the switch, people
should overturn the foods every 2-3 minutes to ensure the foods good grilling
9. After finished grilling , press the "POWER"Button again, Turn Fan and Heating
Element off and unplug from outlet. Carefully remove filter plate for cleaning. Allow
grill to cool completely before disposing of each part, or removing Grill Plate.
Note: Do not operate grill without fans working, as it will cause grease to build-up
inside and can affect performance.