Preparing Rice That Has Not Been Pretreated - Silvercrest SRK 400 A1 Bedienungsanleitung

6) Connect the power cable 5 to the socket 8 and insert the mains plug into
the power socket.
7) Press down the function selector switch 7 and cook the rice for the amount
of time specifi ed on the rice packet.
8) When the rice is ready:
–
–
9) Disconnect the plug from the mains power socket when the rice has been
removed.
NOTE
► Some types of easy-cook rice still have to swell after cooking. Always
follow the preparation instructions on the packaging of the rice.
CAUTION - PROPERTY DAMAGE!
Use only the supplied plastic spoon to remove the rice w. Other spoons
►
may cause damage to the anti-stick coating of the cooking bowl 0.
NOTE
You can insert the plastic spoon w into the bracket at the edge of the rice
►
cooker. This is always ready to hand!

Preparing rice that has not been pretreated

NOTE
Coat the inside of the cooking bowl 0 evenly with a little fat or vegetable
►
oil to achieve a better cooking result.
1) Open the lid by pressing the release 2 and lifting the lid simultaneously.
2) Remove the cooking bowl 0.
NOTE
If the cooking bowl 0 is damaged, do not continue to use it! The damage
►
may have caused the safety shut-off of the appliance to activate, and the
appliance will not allow itself to be switched on.
SRK 400 A1
If you want to eat the rice immediately, disconnect the plug from the
mains power socket.
If you wish to keep the rice warm (max. 2 hours), press the function
selector switch 7 upwards.
GB
IE
7