ZENEC ZE-RVSC100 Montageanleitung Seite 2

MOUNTING
INSTRUCTIONS
Yellow: RCA terminal
connect to monitor
Cam 1 Cam 2
Video 1 Video 2
KEY FEATURES
• Compact high resolution dual sensor rear
view camera
• Reverse voltage controlled video signal
switching of Cam 2
• Eight night vision IR-LED's
• 3 m main wire harness – incl. 15 m extension
cable
• Powder-coated aluminum die cast housing
NOTES:
Following the latest trend in vehicle electronics, newer cars mainly use a pulse width modulated power feed for outer
hull lights, which is unsuitable for imaging/video electronics, as it causes considerable picture distortion.
Use the included connection cable exclusively. Altering or replacing it will void your warranty.
The camera is water- and dustproof and has been tested according to international standard IP68. However, cleaning
your vehicle with a high pressure washer, may damage the housing sealings. For that reason you are asked to steadily
keep a distance of at least one meter between water nozzle and camera housing.
Rev. D
Video switcher
Fuse 0.5 A
GND
DESCRIPTION:
This ZENEC rear view camera model has been developed for use with
mobile homes, caravans and trailers. The use of high quality parts and
materials for best weather resistance and longevity, as well as the clever
construction according to IP68 protection class allow for a perfect
operation in the afore mentioned target vehicles.
The ZE-RVSC100 offers a large 150° / 60° horizontal viewing angle
(Cam1/Cam2) and can be operated a great variety of RVC monitors and
head units.
This product is compatible with all ZENEC moni- and naviceivers, as well
as the ZENEC E>GO product line-up.
Hochauflösende Dual-Sensor
Rückfahrkamera mit IR-LED's
High resolution dual sensor
rear view camera with IR-LED's
for best night vision.
ZENEC by ACR AG Bohrturmweg 1 CH-5330 Bad Zurzach Switzerland
EU Legal Representative:
ACR S & V GmbH Industriestraße 35 D-79787 Lauchringen Germany
ZE-RVSC100
DUAL SENSOR REAR VIEW CAMERA
3.0 m
3.5 mm
jack
Reverse
trigger
for Cam 2
15.0 m
für Nachtsicht.
Power wiring:
Red: ACC (12V ignition) Cam 1
Yellow: ACC (12V ignition) Cam 2
Green: 12V reverse signal (Cam
2 trigger)
Blue: Cable to connect to
reversing light, if head-
unit offers no reverse
gear signal out.