Using The Remote Control; Care And Cleaning - Klarstein 10033479 Bedienungsanleitung

Using the remote control

• Point the remote controller with the head of the front at the receptor on body of the
fan and press the desired button.
• The remote control can be about 5 meters from the front of the fan body; it can be
normally operated if the deviation is within 30 degrees.
• If the remote control is not used for a long time, remove the battery and handle it
properly.
Buttons on the control panel
(Fan body)
The buttons on the body such as On/
Off, Speed, Mode, Oscillation and
Timer have the same functions as those
of the corresponding keys on the remote
controller.

CARE AND CLEANING

The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified
service personnel if service is needed.
• Before cleaning make sure that the power is turned off and unplug the fan.
• To ensure adequate air circulation to the motor, keep vents at the rear of the motor
free of dust. Do not disassemble the fan to remove dust.
• Do not use water or other liquid to clean the electrical components (such as
switching power supply, motor, etc.) and the electrical components can be wiped
clean with a clean cloth.
• Do not use any grinding tools, solvents and abrasive or aggressive cleaning agents
that can damage the surface to clean the fan. You can wipe the exterior parts with a
damp cloth and a little detergent and wipe dry with a clean cloth.
• Do not take the fan apart for modification. It is recommended to inspect and clean
the unit annually as to extend its service life.
EN
17