Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
14
All manuals and user guides at all-guides.com
MOUNTING THE UNIT
1
Carefully remove the appliance from the plastic bag and the carton, and
unwind the cord.
2
Assemble the base of the fan onto the bottom of the body:
A
Remove the 3 thumb screws on the
bottom of the main body.
C
Push the base into the bottom of
the fan body and align the 3 holes.
Attach using the 3 thumb screws.
3
Place the appliance onto a stable, flat and dry surface.
4
Plug the cord set into a 220-240V~A.C. 50Hz earthed electrical outlet. Turn the
power on at the electrical outlet. The blue Power indicator (next to the Power
button) will light up and a beep will sound.
Note: The remote control uses battery. To replace, push clip at bottom of
remote inwards & pull out battery holder, replace battery and push holder back
in.
B
Place the power cord between the
two halves of the base and bring
them together (plug end should be
on the side of the base feet).
D
Fix the cord to the underside of
the base in the 2 small clips and
through the slot that exits close to
the rear of the appliance.
Werbung
Inhaltsverzeichnis
