The Receiving Signal Range Of Remote Control; Cleaning - Klarstein 10021714 Bedienungsanleitung

The receiving signal range of remote control

A: The fan swinging toward
left around 20 degree
Optimal effect can be reached if using
the remote control between the range
of A from C. We suggest that the remote
control be aimed at the receiver
at the front of fan.
Please unplug the fan from the outlet before cleaning.
1. Cleaning loop
TO clean, wipe with a dry or damp cloth. Do not use detergents
or polishes to clean the fan.
2. Cleaning blockage
Look for blockage in the air inlet holes. Use a soft brush
to remove debris.
3. Cleaning aperture
Look for blockage in the small aperture inside the loop amplifier.
Use a soft brush to remove debris.
B: The fan is aimed
at the remote control

Cleaning

C: The fan is swinging toward
right around 20 degrees
11