4�3 Mounting Surface; 4�4 Heat Dissipation - ifm SafetyController CR7032 Bedienungsanleitung/Handbuch

SafetyController CR7032
4.3 Mounting surface
NOTE
The housing must not be exposed to any torsional forces or mechanical stress�
► Use compensating elements if there is no flat mounting surface available�
Mounting surface
4.4 Heat dissipation
► Ensure sufficient heat dissipation as the internal heating of the electronics is
conducted away via the housing�
► In case of sandwich mounting of controllers use spacers�
Heat dissipation and sandwich mounting
8