Helios Hyper Terminal Commands - Starcom Systems Helios Installationsanleitung

Terminal Commands
Terminal commands enable you to control the Helios cellular modem via the RS232
connector. You can do this to test communication quality and solve installation
problems.
Notes:
 Preface all commands with a backslash (\) and end them with "Enter".
 You can be online and connect to the Hyper Terminal concurrently.
 All commands are case-sensitive.
Table 5 Helios Hyper Terminal Commands
Command Name
tdm Cellular Mode
tdg GPS Mode
tdr TCP Mode/Already in TCP Mode
Terminal Commands
Description
Gives direct access to the modem.
Gives direct access to the GPS.
Connects to the TCP/IP network immediately.
39 Simulation Kit Manual