Inhaltsverzeichnis
Werbung
Cellular Phones Commands
You can use a cellular phone to send commands to the Helios.
You must first contact the Starcom Online operator and state the phone number from
which you intend to issue commands. The control center will issue you with a phone
number for the destination commands.
To send SMS text message commands:
Send an SMS text message in the following format:
<COMMAND> <UNIT NUMBER> <STARCOM USERNAME> <STARCOM PASSWORD>
For example, if your login credentials in Starcom Online are "starcom / starcom1" and
the unit's number is 1234, you can activate the siren by sending a command:
AS 1234 starcom starcom1
Insert spaces between the command, the unit number, and the
Note:
password.
The following table defines the SMS text commands supported by the system.
Table 4 Helios SMS Text Commands
Command
AS
DS
AL
DL
AI
DI
LD
UD
AG
DG
AD
DD
STAT
Cellular Phones Commands
Appendix
Description
Activate Siren
Deactivate Siren
Activate Lights
Deactivate Lights
Activate Immobilizer
Deactivate Immobilizer
Lock Doors
Unlock Doors
Activate Gradual Stop
Deactivate Gradual Stop
LED On
LED Off
Status Request
38
Simulation Kit Manual
Werbung
Inhaltsverzeichnis
