Inhaltsverzeichnis
Werbung
Hands Free Kit
The Helios voice function enables you to communicate with the control center or with
any fleet station by commanding the hand set. When the channel is open, the control
center can hear whatever transpires in the vehicle.
Speaker
Earphone
Microphon
e
To activate the handset:
1.
Plug in the communication cable to the Speaker and to the HFK connector
within the 24pin wire-bundle. Important to connect the black
outgoing wire to Ground (-) connection.
2.
If the power supply cable not used for connection to cigarette lighter, cut
the lighter connector and release the internal red and black wires for (+)
and (-) connections as following:
Remote Devices
Figure 16 Hands Free Kit
28
LED
Indicators
To Helios
Power
Simulation Kit Manual
Werbung
Inhaltsverzeichnis
