Inhaltsverzeichnis
Werbung
Remote Control
The remote control is used for arming, disarming,
Locking, and unlocking the vehicle.
You can program up to two remote controls
into the Helios memory.
To program a new Remote Control:
1.
Please download the Installer application update from this link:
http://www.starcomsystems.com/1119bo/
2. Big button: used for Arm/Disarm
Small button: used for emergency.
3. Go to: Helios parameters -> Hardware tab -> mark Remote Control options
As displayed, and Send them to the unit.
Remote Devices
Figure 12: 2-Button Remote Control
23
Arm/Disarm
Button
, then update the unit`s firmware.
Simulation Kit Manual
LED
Siren
Button
Werbung
Inhaltsverzeichnis
