Safety Notes; Operating Conditions; Technical Data; Operation - Grohe 39 368 Installation

Safety notes

Prevent danger resulting from damaged voltage
supply cables.
If damaged, the voltage supply cable must be
replaced by the manufacturer or his customer service
department or an equally qualified person.
• Installation is only possible in frost-free rooms.
• The switched-mode power supply is only suitable for
indoor use.
• The plug-in connectors must not be directly or indirectly
sprayed with water when cleaning.
• The voltage supply must be separately switchable.
• Use only genuine replacement parts and accessories.
The use of other parts will result in voiding of the warranty
and the CE identification, and could lead to injuries.

Operating conditions

®
Bluetooth version 4.0.
The current version of the app required for using the system
must be installed on the control unit in advance.
The required App is available for free in the iTunes Store
(requires an Apple account) and the Google Play store
(requires a Google account), see fold-out page I.
Additional instructions for using the app can be downloaded
under www.grohe.com/tpi/infrared-bluetooth
For operation under adverse environments, in buildings /
rooms with reinforced concrete walls, steel and iron frame, or
near of obstructions (eg furniture) of metal, the Bluetooth
reception can be disturbed and interrupted.
Type of obstructions Interference or shielding
potential
Wood, Synthetic material Low
Water, Bricks, Marble Medium
Plaster, concrete, glass, High
solid wood
Metal Very high
The Bluetooth® adaptor operates in a frequency band of
2.4GHz. The installation near devices with the same frequency
band (eg wireless devices, DECT phones, etc. (observe
manufacturer documentation)) should be avoided.

Technical data

• Voltage supply: 100-240 V AC 50-60 Hz/6.75 V DC
• Power consumption:
• Flow pressure:
- min.
- recommended
• Operating pressure:
• Test pressure:
• Operating temperature:
• Discharge amount for flushing:
• Flow volume (1 - 7 l adjustable):
• Type of protection:
• Connection only to cold water pipe
7
®
Bluetooth :
• Power consumption:
• Output:
®
• Bluetooth - version:
®
• Bluetooth - Transmission distance:
(depending on the environments)
Electrical test data
• Software class
• Contamination class
• Rated surge voltage
• Temperature of ball impact test
The test for electromagnetic compatibility (interference
emission test) was performed at the rated voltage and rated
current.
Programme table, see fold-out page I
*A: Cleaning mode: The water flow can be temporarily
locked.
*B: Interval of automatic flushing, usage-independent.
*C: Interval of automatic flushing, usage-dependent.
*D: Flush during continuous use, every 8 min.
*E: Delay time of the flushing.
Installation
Flush pipes thoroughly before and after
installation (observe EN 806)!
Check connections for leaks.
Not overmolded ceramic with silicone.

Operation

A sensor in the siphon monitors the temperature of the water.
When the temperature rises, the electronics detect a user and
triggers a flushing after the delay time.
Apply magnetic pen, see page 2
Functions can be activated and settings are made with
the magnetic pen.
The electronic signals beeps.
Caution Risk of injury!
Danger of crushing due to strong attraction of the
magnet.
Risk of eye injuries and cuts from splinters of the
magnet.
Magnet gently introduce them to other magnets or
magnetic hardware.
4 W
Caution with allergy!
Magnet contains nickel und NdFeB.
0,05 MPa
Caution with pacemakers
0,1 - 0,5 MPa
People with pacemakers must keep sufficient
max. 1 MPa
distance to magnets (min. 300mm)
1,6 MPa
Caution caused by magnetic field
2°C - 35°C
Keep magnet away from electrical devices and
min. 100 ml
objects, which can be damaged by magnetic fields.
2 l
The safety data sheets for the product can be downloaded
IP 55
from www.grohe.com/safety-data-sheets/
®
Bluetooth - Class 2
about 10m
, see fold-out page I - II and page 1.
1 W
4.0
A
2
2500 V
100 °C