Indications In The Adjustment Mode - Sick In4000 Standard In40-D0101K Operating Instructions

Chapter 3
Note
66
Product description
3.4.2

Indications in the adjustment mode

In the adjustment mode (see section 5.3)
• the yellow signal LED flashes when the actuating
element is outside the enable zone
• the yellow signal LED extinguishes when the
actuating element is within the enable zone or in
the safe switch off range
The output remains in the safe state in the adjustment
mode.
© SICK AG • Industrial Safety Systems • Germany • Subject to change without notice • 8010934/YTC9/2016-04-01
Operating Instructions
IN4000 Standard