oneConcept 10028613 Bedienungsanleitung Seite 31

G27 Gotcha (101, 201, 301, 401, 501, 601, 701, 801, 901)
In this game the score of each dart per turn (3 throws per player) is added to the starting score
of "zero". The player who first throws exactly the previously set target score wins the game.
Throwing over: If a player overthrows the score necessary for exactly reaching the target
score, the round is not counted. The score is reset to that of the previous round.
Returning other players to NULL: If a player reaches exactly the result which another player has
scored before him, the player with the previous result is set to zero.
Example:
Score Player 1: 20
Score Player 2: 50
Score Player 3: 30
Score Player 4: 00
It is player 4's turn and hits with his first dart the 20. Player 1 is therefore reset to zero. Player
4 throws 10 with his second dart and has an overall score of 30. Player 3 is therefore reset to
zero. With his 3rd dart player 4 throws a 1 and now has an overall score of 31.
Trouble Shooting
No power? Make sure that the adaptor is plugged into an electric socket and that the adaptor
is plugged into the connection socket on the dartboard.
No scores? Check whether the game has been set to the 'Settings' mode or to the 'Pause'
mode. Then check whether the sensor elements or the function keys are stuck or jammed.
Stuck sensor elements or stuck function keys? During transportation and even during the
normal operation of the dartboard it can happen that the sensor elements will occasionally get
jammed and will no longer register a hit. In this case a warning signal will be heard, and an
indicator will flash, indicating a stuck element. Gentle extraction of the dart from the element,
or gently moving the element to and fro using light finger pressure will normally free the ele-
ment quickly. The game can then be resumed and the scores will continue from exactly the
point when they were interrupted.
Removing broken-off dart tips: Soft tips are definitely safer to use, but they do not last
forever. Should a tip break off and remain stuck in the dartboard, try to pull it out very ca-
refully with suitable tweezers. Should a tip be broken off so short that it does not protrude
beyond the surface of the dartboard, it can also be pushed into the dartboard through the hole.
The soft tip cannot damage the electronics located beneath the elements. For this operation
however we strongly recommend you use the soft tip of a dart that is in a perfect condition.
Never push a short broken-off tip through the dartboard using a sharp metal object, because
a metal tip can easily cause damage to the board if it is inserted too deeply into the dartboard.
The heavier the dart, the greater the danger of breaking the tip.
31