Troubleshooting - Silvercrest SWKH 2400 A1 Bedienungsanleitung Und Sicherheitshinweise

9. Troubleshooting

If your kettle does not work as usual, use the following instructions to try and solve the problem. If
working through the following tips does not eliminate the fault, please contact our hotline (see the
'Warranty information' section).
The kettle is not working

The plug is not inserted. Insert the plug into the power socket.

The power socket is faulty. Try the appliance in another power socket which definitely works.

The kettle (8) is not switched on. Press the ON/OFF switch (5) down in order to switch on the
kettle (8).

The kettle (8) has overheated and the overheating protection is preventing the device from
switching on. Wait until the kettle (8) has cooled down completely. Fill the kettle (8) with at
least 0.5 litres of drinking water up to '0.5 l MIN' mark.
The ON/OFF switch (5) does not engage when switched on

The kettle (8) is not properly placed on the base (7). Place the kettle (8) properly onto the base
(7).
SilverCrest SWKH 2400 A1
English - 33