Storage When Not In Use; Troubleshooting - Silvercrest SWK 240 A1 Bedienungsanleitung Und Sicherheitshinweise


Open the lid (11) by pressing the lid release button (10).

Carefully reach into the kettle (3),
take hold of the top edge of the
scale filter (1) and pull it upwards
out of the holder (2). Please note
that the holder (2) cannot be
removed.

Place the scale filter (1) into a
warm descaling solution for
household appliances (e.g. for
coffee machines) for a few hours
and then rinse it well in clean
water.

Replace the scale filter (1) by
inserting it into the lateral guides
on the holder (2) from above.

Close the lid (11) by pressing down on it until it clicks into place.

8.3. Storage when not in use

If the kettle is not to be used for an extended period, store it in a clean and dry place.

Allow the kettle (3) to cool completely before storing it.

Wrap the power cable (7) around the cord wrap under the base (6) and store the electric
kettle in a safe and dust-free place.

9. Troubleshooting

If your electric kettle does not work as normal, follow the instructions below to try to solve the
problem. If working through the tips below does not fix the fault, please contact our hotline (see
"Warranty information" section).
The ceramic kettle does not work

The mains plug is not plugged in. Insert the mains plug into a mains socket.

The mains socket is defective. Test the appliance in a different mains socket that you are certain
is working.

The kettle (3) is not switched on. Press the ON/OFF switch (8) down to switch on the kettle (3).

The kettle (3) has overheated and the overheating protection is preventing it from switch on.
Wait until the kettle (3) has cooled down. Fill the kettle (3) with at least 0.5 litres of water up to
the "MIN 0.5L" mark inside the kettle (3).
SilverCrest SWKK 2400 A1
English - 15