Descaling The Kettle (8); Cleaning The Limescale Filter (9); Storing The Device When Not In Use - Silvercrest SWKH 2400 A1 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest SWKH 2400 A1

8.1. Descaling the kettle (8)

Limescale may build up in the kettle (8) over time. This can lead to loss of energy and shorten the
kettles's (8) service life. You should therefore remove the limescale as soon as it becomes visible.

Use a descaling agent that is used for coffee machines and other household devices. Proceed
as described in the instructions for the descaling agent.

Rinse the kettle (8) with plenty of clear water several times after descaling it.

8.2. Cleaning the limescale filter (9)

A limescale filter (9) is installed in the kettle (8). You should clean the limescale filter from time to
time. Proceed as follows to clean the limescale filter (9):

Remove the cooled down kettle (8) from the base (7).

Open the lid (1) by pressing the lid release button (2).

Reach carefully into the kettle (8)
with your hand, grasp the upper
end of the limescale filter (9), and
pull it up and out of the holder.
Please note that the holder can not
be removed.

Place the limescale filter (9) in a
warm descaling solution for
household appliances (such as for
coffee machines) for several hours
and then rinse it thoroughly with
clear water.

Replace the limescale filter (9) by
sliding it from above into the side
guides of the holder.

Close the lid (1) by pressing it down until it snaps into place.

8.3. Storing the device when not in use

If the kettle will not be used for a longer period of time, store it in a clean and dry place.

Let the kettle (8) cool down fully before you store it.

Wrap the power cable (6) around the cable rewind under the base (7) and store the kettle in a
safe, dust-free place.
32 - English