Troubleshooting - Silvercrest SWKK 2400 A1 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest SWKK 2400 A1

9. Troubleshooting

If your electric kettle does not work as normal, follow the instructions below to try to solve the
problem. If working through the tips below does not fix the fault, please contact our hotline (see
"Warranty information" section).
The ceramic kettle does not work

The mains plug is not plugged in. Insert the mains plug into a mains socket.

The mains socket is defective. Test the appliance in a different mains socket that you are certain
is working.

The kettle (3) is not switched on. Press the ON/OFF switch (8) down to switch on the kettle (3).

The kettle (3) has overheated and the overheating protection is preventing it from switch on.
Wait until the kettle (3) has cooled down. Fill the kettle (3) with at least 0.5 litres of water up to
the "MIN 0.5L" mark inside the kettle (3).
The ON/OFF switch (8) does not snap into place when switched on

The kettle (3) is not correctly placed on the base (6). Place the kettle (3) correctly on the base
(6).
34 - English