Replacing I/O Module; Note On Assembling Electronics Module With Connection Board - Endress+Hauser Promag 400 Index C Einbauanleitung

10

Replacing I/O module

Proceed according to section 7.1., Fig. 1 - 8.
1
1.
2.
10.1 Assembling I/O module
Re-assembly is carried out in reverse order.
11 Note on assembling electronics module with
connection board
The jumper (Fig. 1 below) must be removed prior to installing the amplifier. Ensure that
the S-DAT is inserted in the connection board (Fig. 2 below).
1 →
Endress+Hauser
2
S-DAT
EA01099D
15