Hot Water Function Of Boiler; Hot Water Function Of C-Mix; Weekly Switch-On Function - REMEHA c-Mix Installations- Und Wartungsanleitung

5.4

hot water function of boiler

When the boiler supplies hot water, the c-Mix for-
wards all information to the controllers. Vice versa,
the hot water, temperature and ECO settings are
forwarded to the boiler from controller 1 only.
5.5

hot water function of c-Mix

In order to prevent the jamming of valves and
pumps, these are switched on once per week for a
short period when they have not been in use for a
week. The boiler is not switched on here.
It is important with this control that the maximum
boiler temperature is at least 20°C higher than the
required hot water temperature. If this is not the
case, the calorifier may be unable to attain the
required hot water temperature.
5.6

Weekly switch-on function

In order to prevent the jamming of valves and
pumps, these are switched on once per week for a
short period when they have not been in use for a
week. The boiler is not switched on here.
43