Moser 1234 Originalbetriebsanleitung Seite 14

ENGLISH
f We recommend that you clean and care for your
de
blade set during and after clipping with Blade Ice
spray. The Blade Ice spray ensures instant cooling,
en
oiling and cleaning of the blade set, while also pro-
tecting against corrosion.
fr
f Switch the appliance on briefly (approx. 10 sec-
onds) to ensure the oil film is evenly distributed.
it
f For a good and long-lasting cutting perfor-
mance, it is important to oil the blade set
es
frequently.
f If the cutting performance deteriorates after
pt
long use despite regular cleaning and oil-
ing, the blade set should be replaced.
nl
f Only wipe the appliance with a soft, slightly damp
da
cloth.
sv Changing the blade set
1. Press locking lever (G) downwards (Fig. 6ⓐ) and,
no
at the same time, grip the bottom blade by the
shaped recesses (J) in its sides (Fig. 6ⓑ) and,
fi pressing down on the locking lever, pull off the
appliance (Fig. 7ⓐ).
2. Push the top blade down and remove it (Fig. 7ⓑ).
tr
3. Place the new top blade on the plastic guide and
press it down (Fig. 8ⓐ), so that the hook (E) of the
pl
retainer spring locates in the blade cutout (Fig. 8ⓑ)
and the guide groove of the top blade (D) clicks into
cs
the plastic guide (H).
4. Grip the new bottom blade using the shaped
sk
recesses (J) on its sides, and insert in the guide
groove (I) (Fig. 9).
hr
5. Slide the bottom blade forwards until it engages in
position.
hu
Problem elimination
sl
Blade set is cutting badly. Blade set is pulling hair
ro
out.
Cause: Blade set is dirty.
bg
f Clean and oil the blade set (Fig. 4/5).
ru
Cause: Blade set is worn out.
f Replace the blade set (Fig. 6/7/8/9).
uk
Skin injury
et
Cause: Too much pressure on the skin.
f Less pressure on the skin.
lv
Cause: Cutting angle is too steep.
f Hold appliance flatter to the skin.
lt
el
ar
14
Appliance is not working.
Cause: Defective power supply.
f Make sure that contact between the appliance plug
and the socket is faultless. Check the mains cable
for possible damage.
In the event that this information does not help you
resolve your problem, please contact our service cen-
tre. Never attempt to repair the appliance yourself!
Disposal
Handle with care! Environmental damage in
the event of incorrect disposal.
f Correct disposal will ensure environmen-
tal protection and prevent any poten-
tially harmful impact on people and the
environment.
Adhere to the relevant legal requirements when dispos-
ing of the appliance.
Information on the disposal of electrical and elec-
tronic appliances in the European Community:
Within the European Community, national
regulations are specified for the disposal of
electrical appliances, based on EU Waste
Electrical and Electronic Equipment Directive
2012/19/EC (WEEE). In accordance with this,
the appliance can no longer be disposed of
with the local or domestic waste.
The appliance will be accepted free of charge
by local collection points or recycling centres.
The packaging for this product is made from
recyclable materials. Dispose of this in an
environmentally friendly manner by recycling it.