Moser 1234 Originalbetriebsanleitung Seite 13

Operation
Preparation
Keep the packaging material for safe storage
or transport later.
f Check that the contents are complete (see
packaging).
f Check all the parts for possible transport damage.
Safety
Caution! Damage due to incorrect power
supply.
f Only operate the appliance with an alternat-
ing current and with the voltage stated on
the nameplate.
Mains operation
1. Check the lubricating condition of the blade set and
oil it if necessary (Fig 5).
2. Insert the appliance plug into the mains socket.
3. Switch on the appliance using the on/off switch
(Fig. 2ⓐ) and, after use, switch it off again (Fig.
2ⓑ).
Operation
Cutting with the attachment comb
The appliance can also be operated with attachment
combs. Attachment combs can be used to extend the
cutting length range.
Attaching/removing the attachment comb
1. Slide the attachment comb on to the blade set in
the direction of the arrow until it reaches the limit
stop (Fig. 3ⓐ).
2. The attachment comb can be removed by pushing it
in the direction of the arrow (Fig. 3ⓑ).
Attachment combs
Material: Plastic
Order no. 1230-7490 #1 (4.5 mm)
Order no. 1230-7500 #2 (6 mm)
Order no. 1230-7510 #3 (9 mm)
Order no. 1230-7630 #4 (14 mm)
Order no. 1230-7640 #5 (19 mm)
Order no. 1230-5400 adjustable attachment comb
(4 – 18 mm)
6-piece attachment comb set
Material: Plastic
Order no. 1881-7170
#1 (3 mm)
#2 (6 mm)
#3 (12 mm)
#4 (12 mm)
#6 (18 mm)
#8 (25 mm)
8-piece attachment comb set
Material: Plastic with metal teeth
Order no. 1233-7050
#1 (3 mm)
#2 (6 mm)
#3 (10 mm)
#4 (13 mm)
#5 (16 mm)
#6 (19 mm)
#7 (22 mm)
#8 (25 mm)
Maintenance
Warning! Injuries and material damage due
to incorrect handling.
f Switch off the appliance before cleaning it
or performing any maintenance. Disconnect
the appliance from the power supply.
Cleaning and care
Danger! Electric shock due to penetration
of liquid.
f Do not immerse the appliance in water!
f Do not allow any liquid to get inside the
appliance.
f Only reconnect the appliance to the power
supply if it is completely dry.
Caution! Danger from aggressive
chemicals.
Aggressive chemicals could damage the appli-
ance and accessories.
f Never use solvents or scouring agents.
f Only use cleaning agents and blade set oil
recommended by the manufacturer.
Accessories and spare parts are available from
your dealer or our service centre.
f Remove the attachment comb (Fig. 3ⓑ) after every
use. Remove the hair clippings from the blade set
with the cleaning brush.
f If thorough cleaning is required, (Fig.6) the
blade set can be removed. See chapter-
Changing the blade set.
f After cleaning the blade set, we recommend using
hygienic spray. It keeps all blade sets hygienically
clean and is effective against bacteria and viruses.
f Oil the blade set with blade set oil before use
(Fig. 5).
ENGLISH
de
en
fr
it
es
pt
nl
da
sv
no
fi
tr
pl
cs
sk
hr
hu
sl
ro
bg
ru
uk
et
lv
lt
el
ar
13