Kessel SonicControl Anleitung Für Einbau, Bedienung Und Wartung Seite 45

Installation dimensions of sensor
Underground
Article No.
Installtaion
93002 / 80 / 120 B und D
93004 / 80 / 120 B und D
93007 / 120 B und D
93010 / 120 B und D
93015 / 120 B und D
93020 / 120 B und D
DIN 4040 "G"
98201 / 00 / 80 / 120 B und D 1
98202 / 00 / 80 / 120 B und D 2
98204 / 00 / 80 / 120 B und D 4
F
Note: For more articles please contact the KESSEL customer service.
After installation completely fill the separator with water, check height and correct if necessary!
Completely filled separator must perform the "manual mode" (2.1.) SonicControl "0 cm" show.
Should be no mechanical correction possible change in "Parameters -> level adjustment"(3.1.7) to perform.
The parameters are password protected - please contact the KESSEL customer service at +49 (0) 8456/27462.
3. Installation and Assembly
Distance between the
upper edge of the
lower "finger" and the
NS
lower edge of the outlet
(water line)
2 50 cm
4 50 cm
7 48 cm
10 48 cm
15 56 cm
20 56 cm
58 cm
58 cm
58 cm
45
Alarm level
= max. grease
layer thickness
Drill holes in
in cm
drilling template
obere beiden Bohrlöcher 17
Top two drill holes
Top two drill holes obere beiden Bohrlöcher 17
untere beiden Bohrlöcher 17
Top two drill holes
untere beiden Bohrlöcher 17
Top two drill holes
untere beiden Bohrlöcher 17
Bottom two drill holes
untere beiden Bohrlöcher 17
Bottom two drill holes
Bottom two drill holes
untere beiden Bohrlöcher 16
Bottom two drill holes
untere beiden Bohrlöcher 16
Bottom two drill holes
untere beiden Bohrlöcher 16
max. sludge layer
Recommended
preliminary
in cm ( = 50% of
alarm level in cm
(= 2/3 of the max. sludgetrap volume)
storage volume)
11
15
11
27
11
23
11 23
11 32
11 31
11
46
11
54
11
54