Installation / Cable Connection - Kessel SonicControl Anleitung Für Einbau, Bedienung Und Wartung

4.4 Installation / Cable Connections
The SonicControl cable may not be laid with
together with any other electrical systems /
circuits. Do not lay the cable parallel with
any other cables in order to prevent an elec-
trical interference which can cause the So-
nicControl to malfunctions. The sensor itself
should not be grounded.
4. Electrical connection
IMPORTANT:
All cables entering the control unit should be se-
cured properly secured with a tie-wrap or cable
clip to prevent any danger to the unit or the ope-
rator in the case that a cable connection comes
loose. The sensor cable should be laid separate-
ly from the control unit s power cable to prevent
interference
51