Kessel SonicControl Anleitung Für Einbau, Bedienung Und Wartung Seite 52

Possibilities of professional cable
extension on site (IP 68)
The SonicControl cable is ten metres long.
On site, this cable can be extended by a
qualified electrician up to max. 60 metres
without any change in cross-section being
necessary.
SonicControl probe extension to max. 60
metres 0,75 mm 2
Fig. 1: Crimp cable extension with butt joint
Fig. 2: Shell is placed around the cable, both shell ends are sealed
Fig. 3: Cast the shell with prepared casting resin
Fig. 4: Final state with sealing plug
Individual parts on request
4. Electrical connection
Note:
The regulations set out by the directive
VDE 0100 must be heeded. The switch
unit must not be installed in potentially
explosive areas. The 10 m cable can be
extended on site to up to 60 m. If the
cable is routed in a cable channel with
cables from other frequency-controlled
units, a shielded cable has to be used!
Fig.1
Fig.2
Fig.3
Fig.4
52