Mounting Instructions For Contact Bulb - WIKA TGT73 Serie Betriebsanleitung

5. Commissioning, operation / 6. Mounting ...
WARNING!
Physical injuries and damage to property due to oil
spraying out
When pouring a thermal contact medium into a hot
thermowell, there is a danger of physical injuries and damage
to property due to oil spraying out.
▶
Do not fill hot thermowells

6. Mounting instructions for contact bulb

The contact bulb has been designed for mounting on pipes or tanks.
When mounting this thermometer version, it must be ensured that the
contact bulb is in contact with the measuring point over its complete
length. The basic requirements to ensure a perfect measuring result is
to retain good thermal contact between the contact bulb and the outside
wall of the pipe or tank with minimal heat loss to the environment from
the contact bulb and measuring point.
Bend protection
WIKA operating instructions model TGT73 (Ex)
Capillary
EN
23