Electrical Connection - Technibel CWX series Aufstellungshandbuch

90°0'
18
CWX 6-8-10
• The unit can be connected to an outside air inlet conduit.
- Open the knock-out (A), secure a connection sleeve (not supplied) to the unit and connect a thermal
insulated conduit.
- On the exterior, install a grille with filter to prevent drawing in dust and debris which could clog the unit's
exchanger.
A
X

4.4 - ELECTRICAL CONNECTION

4.4.1 - Generals
• The electrical connection conduits must be fixed.
• Class 1 appliance.
• The electrical installation must be carried out in
compliance with the rules in force (especially NF C
15-100 CEI 364).
4.4.2 - Detail of the connection
• Remove the cover of the electrical box.
• Cable clamps are provided to maintain the cable at
their entry point into the box.
• Connect the cables to the terminals provided.
• Make sure that the wires are correctly connected to
the terminals. Incorrect connection can cause
operating problems as well as overheating which
can cause fires.
• When replacing the box's cover, be sure not to
pinch the cables.
CWX 6-8-10
Electrical cable
passage
Cable inlet into
the unit
Electrical box
cover
4 holes ø 3,1
55
CWX 3-5
17
Model X
220
CWX 6
250
CWX 8-10
GB
7