Installation - Technibel CWX series Aufstellungshandbuch

CWX 6-8-10
L
Model
760
CWX 6
GB
CWX 8-10 1050
Net weight
Model
Unit
Facade / grille assembly
A Condensate opening : OD 32 mm
B Water inlet : 3/4" female - gas
C Water outlet : 3/4" female - gas
D Air vent valver
E Electrical cable passage
F New air intake: 60 mm x 55 mm

3 - INSTALLATION

3.1 - CHOOSING THE LOCATION
• This unit is designed to be installed in sheltered rooms (IP 20).
• Do not install the device in a room containing inflammable, alkaline, acidic, greasy or very damp air, nor in one
where water is liable to be projected. The components will be irremediably damaged.
• Choose the most central position in the room.
• Check that the ceiling is sufficiently sturdy to support the unit's weight.
• In the position chosen, check that no obstacle will impede installation and maintenance (beam, insufficient false
ceiling height, fixed false ceiling panels, access impossible for maintenance, etc.).
• Provide an access for easy maintenance, namely for the valve (and electrical box for CWX 3-5 models).
• Provide for the water pipes, electric cables and the condensate discharge outlet.
• Air must be able to circulate freely around the unit.
Note : air diffusion will be less efficient if room height is greater than 3 meters.
Valve
4
H X Y Z
310 260 860 500
340 290 1150 750
CWX 6
23 kg
5 kg
L
Auxiliary
condensate tank
CWX 8-10
29 kg
Y
7 kg
F
H
1 m
860
500
760
D C B
E
1 m
1 m
1 m
Z
A
X
1 m