Replacing The Rechargeable Batteries - LIVARNOLUX HG03508A Montage-, Bedienungs- Und Sicherheitshinweise

marking of the mounting plate ( UP) is
showing vertically upward (Fig. A).
Note: The enclosed mounting material is
suitable for ordinary masonry construction.
Other wall substrates may require other fas-
tening materials. Seek specialist advice when
in doubt.
Set the ON / OFF switch
"ON" to start the operation of the product
(Fig. G).
Note: In the "OFF" position both the light
and the charging function are disabled.
Attach the product to the mounting plate in
such a way that the hangers
mounting plate grip in the receivers
the back of the product. Slide the product
downwards until the hangers click into place
in the receivers (Fig. B).
After mounting, check that the main unit is
fitted securely.
Note: Regularly clean the sensor and solar
cell to ensure proper functionality (refer to
"Cleaning and Care").
to the position Change the rechargeable batteries as follows:
11
of the
4
on
5
Replacing the
rechargeable batteries
Slide the product upwards until the hangers
release from the receivers
Remove the product from the wall.
Set the ON / OFF switch
(Fig. G).
Loosen the fixing screws of the battery
compartment lid and remove these
8
(Fig. D).
Remove the rechargeable batteries
the battery compartment
these with new rechargeable batteries
(Fig. E). Use only rechargeable batteries
of the recommended type (see „Technical
data"). Be sure to insert the rechargeable
batteries in the correct direction. It is in-
10
dicated in the battery compartment.
4
(Fig. B).
5
to position "OFF"
11
from
10
and replace
9
10
10
GB/IE/NI 11