Classification Key; En 1125 Panic Door Locks; Ce Identification Marking - Assa Abloy MSL sFlipLock Serie Montage- Und Bedienungsanleitung

Tab. 4 :

Classification key

according to EN 1125
EN
52
Classification key
EN 1125 panic door locks
The classification key describes the properties of locks according to EN 1125.
Tab. 4 explains the classification key.
Class Meaning
3 High usage frequency and little incentive for care in areas where the possibility of accident or
misuse exists
7 200,000 test cycles
6 Door weight up to 200 kg
B Suitable for use on fire doors and smoke doors when tested in accordance with EN 1634-1
1 Suitable for critical safety functions
3 High corrosion resistance in accordance with EN 1670:2007 Section 5.6
2 Refer to "EN 179 emergency exit locks", page 53, as this standard specifies higher burglary
protection requirements
1* Projection: maximum 150 mm
2* Projection: maximum 100 mm
A* Push bar
B Touch bar
B Only suitable for installation in single-leaf doors
* Classification depends on the fitting used

CE identification marking

C
0757-CPR-229Panik-6039631-22-2
EN 1125: 2008
ASSA ABLOY (Schweiz) AG
Schlosstechnik
Laufenstrasse 172
4245 Kleinlützel
SWITZERLAND
2017
3 7 6 B 1 3 2
—
1* A*
B
2* B
Functions and operation