Product Information; Product Description; Sfliplock Access And Sfliplock E-Access; Additional Features - Assa Abloy MSL sFlipLock Serie Montage- Und Bedienungsanleitung

For fire doors
For escape route doors
I
Mechanical self-locking
EN
40

Product information

Product description

sFlipLock access and sFlipLock e-access

The sFlipLock access and the sFlipLock e-access (Fig. 1) are panic/security/mortise locks with motorised
unlocking, integrated status messaging, three deadbolts and three blocking flip latches with noise
insulation. Flip latches enable the door to be opened even under high initial loads.
On being unlocked, the deadbolts are retracted mechanically or motor-driven and then the flip latches are
released.
In combination with evaluation control system (AWS), the lock is suitable for fire doors and smoke doors.
The lock is tested according to EN 179 and EN 1125 and can be used on emergency exit doors or panic
doors in combination with the tested fittings.
Note!
The lock is only available in combination with evaluation control system. The evaluation control system
generates the evaluation of lock contacts and lock control via the RS485 data bus interface and can be
connected directly to an access control system (for information on connection, refer to the evaluation
control system operating instructions).
The lock's mechanical self-locking feature is activated when the door is closed and guarantees automatic
locking at all times ("Self-locking function", page 49).

Additional features

· Equipped with an integrated motor control system for the basic open and close functions.
· Motorised unlocking via an electrical impulse or motorised coupling and decoupling of the outside lever
handle, for example via finger scanner or RFID card reader.
· Evaluation and feedback of lock status, including service interface for fault indication and operating
cycles.
· Additional operating inputs for Day mode (fast opening under 1 s) and blocking input for interlock and
intruder functions.
· Mechanical self-locking with automatic sequence control.
· Burglar resistant due to single-turn bolt extension of 20 mm. Tested to RC2 in suitable door element.
· Approved for fire doors and smoke doors when used with evaluation control system or a buffer
capacitor.
· Tested for doors with emergency exit locks according to EN 179 and doors with panic door locks accord-
ing to EN 1125.
· Suitable for rotary cylinders and free-wheel cylinders. Not suitable for external bolt contacts.
Product information