Care And Cleaning Information - Konig + Neurath BASIC 4 Montageanleitung

Safety information
For transport: do not lift or carry the desk by the desk top but by the leg
frame!
Please follow assembly instructions when reconfiguring!
If the desk has sprung height adjustment, the desk must be erected and
ready to use before adjusting, otherwise there is a risk of injury!
Please ensure that power cables are not trapped between furniture when
arranging electrics.
The desks are not suitable for use in the workshop or warehouse.

Care and cleaning information

Plastic-coated and metal surfaces:
Clean the surface with a duster. Use warm water and / or a mild cleaner to remove
marks, then wipe dry.
Caution: Do not use abrasive cleaners! This can cause permanent visible damage.
Natural wood finishes:
Wipe the surface with a duster. Use a damp cloth and a neutral cleaning agent to
remove soiling, then wipe dry.
Caution: Do not use abrasive cleaners! This can cause permanent visible damage.
Avoid direct exposure of the natural wood finish to high temperatures and moisture.
Please note that the natural wood finish can change colour over time if exposed to
UV rays. This is a natural ageing process of the wood.
No liability is accepted for damage to the finish caused by incorrect cleaning.
30