Linear Connection Between Tables; Fitting The Link Element, Link Desk And Desk Top Extension - Konig + Neurath BASIC 4 Montageanleitung

7. Linear connection
between tables
Remove covers (a).
Position connectors (b) be-
tween side sections.
Screw on both sides (c),
using cylinder head screws
M8x12 (SW6).
8. Fitting the link ele-
ment, link desk and
desk top extension
Remove end caps (a) from
pre-drilled holes on the side.
Guide the link frame (b) into
the drilled holes with the pins
and secure in place from the
inside using cylinder head
screws (c) M8x12 (SW6).
(a)
(c)
view from above
(c)
(b)
(c)
(b)
22
(c)
(b)
(a)
(c)