Modster COMPASS Betriebsanleitung Seite 24

Betriebsanleitung
Move bowsie to adjust
bended angle of mast.
It should be a little bit bended,
but ensure it is a
straight center line between
top and bottom of mast.
Move the bowsie at
lower position to tighten or
loosen jib sail hypotenuse.
Move bowsie to tighten or
loosen jib sail leg.
Move bowsie to adjust distance
between jib boom and deck.
24
MODSTER COMPASS
Move bowsie to tighten or
loosen main sail leg.
Move bowsie to adjust bended
angle of mast. It should be ben-
ded little like a bow as dotted
line shown in picture, but
ensure it is a straight center
line between top and bottom
of mast.
Loosen the screw and move the
arm on main boom to adjust
height of main boom(only nee-
ded when the cord tied on SR1
is not perfect).
www.modster.at