Use; Installation; Requirements For A Measurement; Detaching The Handset - Dräger Interlock series Gebrauchsanweisung

Use

3 Use
3.1

Installation

WARNING
!
Alterations and additions to the device may cause danger.
Such alterations and additions invalidate the certificate of
installation contained in this instructions for use booklet.
The installation may only be carried out by an authorized Dräger
Interlock service centre or a professional auto repair shop according to
the respective instructions for installation.
When choosing the installation site, the existing regulations for the
interior of vehicles have to be observed.
26
3.2

Requirements for a measurement

No alcohol and solvent vapours (disinfectants, window cleaning

fluids) in the ambient air.
Do not allow a high alcohol concentration to reach the sensor, e. g.

from drinking alcohol, eating alcohol containing foods or rinsing
the mouth with alcoholic mouthwash just before measurement.
3.2.1

Detaching the handset

1. At temperatures below –20 °C
(–4 °F) and over +70 °C
(176 °F) in the interior of the
vehicle, the handset can be
detached from the connecting
cable, if provided, for quicker
readiness of use.
2. Press this spot (1) on the
connecting plug and detach
the plug.
3. Store handset in a location
with a moderate temperature.
4. Before starting the vehicle,
connect handset again.
1
00333351.eps
Dräger Interlock 5000 / 7000