Troubleshooting - EINHELL NHL 2000 Originalbetriebsanleitung

Anleitung_NHL_2000_SPK7:_

12. Troubleshooting

If the equipment is operated properly you should experience no problems with malfunctions or faults. In the
event of any malfunctions or faults, please check the following before you contact your customer services.
Fault
The equipment does not work
The equipment switches off on its
own
The equipment blows out cold air
23.04.2010 12:53 Uhr Seite 17
Possible cause
Power plug is not connected
Power switch not switched on
Topple cut-out switch not pressed
The selected heating period has
elapsed
The desired temperature has been
reached
GB
Remedy
Connect the power plug
Switch on the power switch
Place the machine on a level
surface.
Reset the heating period
17