Troubleshooting - EINHELL EH 5000 Bedienungsanleitung

Anleitung_EH_5000_SPK7:_

11. Troubleshooting

If the equipment is operated properly you should experience no problems with malfunctions or faults. In the
event of any malfunctions or faults, please check the following before you contact your customer services.
Fault
The equipment does not work
The equipment blows out cold air
17.03.2011 7:28 Uhr Seite 13
Possible cause
Power plug is not connected
Power switch not switched on
Socket outlet without power
The desired temperature has been
reached
Overheating guard has been
triggered
GB
Remedy
Connect the power plug
Switch on the power switch
Check the socket fuse
Reset the overheating guard
(see chapter 7.4 Overheating
guard)
13