Main Menu Screen; Change Language - LAUNCH Creader 619 Schnellstartanleitung

Creader 619
2. Register & Update (Cont'd)
Select Language
Product Serial Number
6. Select the updates you would like to perform or click "
and then click [Download] to start downloading.
7. Once all steps are complete, restart your tool. It will prompt you to
upgrade, click [OK] to start updating. It may take
several minutes to finish the update.
8. The update process is complete, your tool is now ready for use.

3. Main Menu Screen

Once the tool is powered, it will enters the main menu screen, it
mainly includes the following functions:
 Diagnose : It mainly consists of OBD/EOBD diagnosing and
Reset/System Scanning(varies with product models).
 Review : To review the recorded DTC, datastream etc.
Settings : To configure the system language, measurement

units, turn on/off beeper and recording mode.
Help : Includes DLC location, DTC lookup and tool information

etc.

4. Change Language

The tool supports multiple languages. To change the language,
select "Settings" -> "Language", choose the desired one from the list
and press [OK].
Quick Start Guide
9
English
Device Upgrade
Select All
5. Start Diagnostics
Diagnosis Flowchart of Vehicle System
",
Select "Diagnose"
Select "Scan"
Select Vehicle
Manufacturer
Select Vehicle Model
(Note: This mode allows your
tool to scan the vehicle test
system automatically)
Read fault code
Clear fault code
Select test function
Read data stream
Select test system
Manual Select
Automatic
(Note: In this case, you need to
choose the desired system
manually. Just follow the on-
screen instructions to proceed.)
LAUNCH