The PC setup program is used for configuration and fine adjustment
of the transmitter from a PC (e.g. when the sensor drifts).
Connection is through the PC interface with USB/TTL converter and
adapter and the setup interface of the transmitter. In order to
configure the transmitter, it has to be connected to the supply
voltage.
H
If you want to operate the transmitter with the setting that
was transferred through the PC setup program, all DIP
switches must be set to off.
If you want to use a configuration that is available in the
transmitter, the measuring range as well as input and output
have to be set via the DIP switches.
3 PC setup program
11