3M ELITE Serie Benutzerhandbuch

3
RANDOM ORBITAL SANDER ELITE SERIES INSTRUCTION MANUAL
127 mm (5 in.) and 152 mm (6 in.)
12,000 RPM
Please read understand and follow all safety information contained in these instructions prior to the use of this tool.
Retain these instructions for future reference.
This pneumatic tool is intended for use in industrial locations, and used only by skilled, trained professionals in accordance with the instructions in this manual.
This pneumatic tool is designed to be used with a disc pad and appropriate abrasive for sanding metals, wood, stone, plastics and other materials. It should only
be used for such sanding applications and within marked capacity and ratings. Only accessories specifically recommended by 3M should be used with this tool.
Use in any other manner or with other accessories could lead to unsafe operating conditions.
Do not operate tool in water or in an excessively wet application.
Do not use disc pads that have a Max RPM less than the tool Max RPM rating. Never use disc pads that have a weight and/or size different than what the tool was
specifically designed for.
Always operate at 90 PSIG / 6.2 bar max
Hand / Wrist / Arm injury can occur with prolonged exposure to vibration
W
WARNING:
W
CAUTION:
Rev. 3/16/2015
Important Safety Information
Intended Use
Summary of device labels containing safety information
Marking
12,000 RPM
Explanation of Signal Word Consequences
Indicates a potentially hazardous situation which, if not avoided, may result in death or serious
injury and/or property damage.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury and/or property damage.
W WARNING
W
WARNING: Refer to Instruction Manual
Maximum Pneumatic Inlet Pressure
Maximum Rotational Speed
1
Description
Vibration Safety Note
Original Instructions