Using The Configuration Menu; Controlling Remote Video Accessories - Stryker 1188HD Benutzerhandbuch

Using the Configuration Menu

The Configuration Menu allows adjustment of some camera settings. Settings can
affect video quality, and care should be taken when altering them.
1. Enter the Configuration Menu by pressing the Enhance Up and Enhance
Down buttons on the console simultaneously for more than three
seconds. The menu will appear on the On-Screen Display (OSD).
2. Use the Enhance Up and Enhance Down buttons to scroll through the
menus and submenus:
• Shutter
• Color
• Options
3. Press the Specialty button to select an item from the Configuration
menu.
4. Use the Up and Down buttons to adjust the selection.
5. Press the P button to return to the Configuration Menu.
6. Press the P button again to exit the Configuration Menu.

Controlling Remote Video Accessories

The 1188HD Camera can remotely control up to two video accessories (such as
the SDC Ultra, a VCR, or a photo printer), enabling the user to capture images or
start and stop video recording by pressing the P button. (See also the "Using the
Camera Buttons" section of this manual.)
1. Connect the video accessory to one of the remote outputs on the rear
console panel. Use the provided remote cables. (See Wiring Diagram 2 in
the "Setting Up the Console" section of this manual.)
2. Press the P button for less than one second to select Remote 1. One beep
will sound.
3. Press the P button for more than one second to select Remote 2. Two
beeps will sound.
EN-22