thermo spectronic Helios Gamma Benutzerhandbuch Seite 63

Once communication has been established you will need to save the debug data to
a file. Do this using the TRANSFERS/CAPTURE TEXT as shown below.
Connecting Helios to a PC
1) Use a null modem cable (part number 4013 172 82111) to connect the RS232C
port of Helios to a free COM port on the PC.
Here is the pin out data for the RS232 Cable
Switch on the PC and set up a terminal programme as described above.
Collecting Data
Once you have established control of the instrument and switched on the debug
software you will need to collect the data that is returned and save it to file. This
can be done by several methods, the next section details one of them.
58
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
FAULT FINDING
Pin Pin
9 to 9
2 3
3 2
4 8
8 4
6 1 and 7
1 and 7 6
5 5
Earth Earth
English GD Issue 1 (08/2000)