thermo spectronic Helios Gamma Benutzerhandbuch Seite 46

LAMPS Page - Delta
The lamp functions are available directly from the LAMPS key on the SETUP and
MENU pages.
This page shows the status of the Tungsten Halogen lamp, whether ON, OFF or
FAILED, and the energy level. It also allows the lamp hours to be reset.
The HOURS parameter states the number of hours that the lamp has been in
use.
The Tungsten Halogen lamp should be replaced after 2000 hours.
Whenever a lamp is changed then the hours parameter should be reset to zero.
* LAMPS *
TUNGSTEN : ON
HOURS : 987
ENERGY : 99%
GD Issue 1a (12/2000)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SETUP
RESET W HRS - Resets hours and measures energy at the
appropriate wavelength. ALLOW THE LAMP AT LEAST 10
MINUTES TO WARM UP BEFORE RESETTING ITS
HOURS.
W ENERGY - ALLOW THE LAMP AT LEAST 10 MINUTES
TO WARM UP BEFORE MEASURING ITS ENERGY.
CLEAR BOTH SAMPLE AND REFERENCE BEAMS
BEFORE MEASURING LAMP ENERGIES.
English 41