thermo spectronic Helios Gamma Benutzerhandbuch Seite 6

THIS SYSTEM IS DESIGNED TO BE USER INSTALLED -
So, use the following procedures to quickly get your new spectrophotometer
system in position and running the way you want it.
1. Read the Safety
instructions on page 3 of this
manual.
Check the component parts of
2.
the system against the
Despatch Note and Packing
List. Immediately report by
telephone (confirmed in
writing) any
discrepancies.
3. Find a suitable location.
(see below)
MINIMISE
VIBRATION
4. Connect the supplied power cord to the spectrophotometer.
5. Ensure NO SAMPLE(S) are in place in the sample compartment .
- Turn the spectrophotometer on.
GD Issue 1 (08/2000)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
INSTALLATION
AVOID STATIC
ELECTRICITY
NO DUST
English
NO DIRECT
SUNLIGHT
o
5 - 40 C
1