Date Format - thermo spectronic Helios Gamma Benutzerhandbuch

PRINTERS Page
This page sets the system to work with the selected printer.
The printer type is always highlighted. To choose a printer press ENTER to
display the list of supported printers, and select using cursor keys. Press ENTER
to confirm entry.
PRINTER
EPSON 9 PIN
INTERNAL
Printers not on the above list that claim Epson 9 pin / 24 pin / ESC/P
compatibility should work with the instrument but are not guaranteed to do so
and are therefore not supported. If in doubt contact your local Thermo
Spectronic approved Customer Support Organisation.
Note: Printers designed to work only in a Windows environment are not
compatible with Local Control Software.
Before attempting to print using an external printer at any point during operation of
the instrument, ensure that the printer is ready to print. Failure to do so will result
in an error condition. Press CLEAR to clear the error message. Then rectify the
problem with the printer, and try again.
ENVIRONMENT page
This page is used to select the language used for the software, the use of the beep,
date format, etc.
* ENVIRONMENT *
LANGUAGE
SOUND

DATE FORMAT

AUTOPRINT RESULTS
PROTECT METHODS
CHANGE PASSWORD
HIDDEN PASSWORD
AUTOPRINT RESULTS
When ON, results are printed automatically after each run.
Before attempting to print at any point during operation of the instrument ensure
that the printer is ready to print, ie switched on, on line and supplied with paper.
36
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SETUP
Printer options
EPSON 9 PIN
INTERNAL
LANGUAGE : Select from the list.
The language used immediately
changes to the one selected.
: ENGLISH
: OFF
SOUND
: dd/MM/yy
beeper ON or OFF. If set to OFF
then the only indication of any error
: OFF
is the screen message.
: OFF
:
DATE FORMAT: Defaults to
: OFF
dd/MM/yy, but will toggle with
ENTER to MM/dd/yy.
: Toggles between ON and OFF.
English
Supported Printers
Epson 9 or 24 Pin Dot Matrix,
using ESC/P language.
Supplied thermal printer only
: Turns the warning
GD Issue 1a (12/2000)