Upgrading The Kvm S2-Adapter Firmware; Simultaneously Upgrading Multiple Kvm S2-Adapters - Fujitsu KVM s2-1602 Bedienungsanleitung

Upgrading the Firmware
• Verify that no other program is currently using the COM port, or that a previ-
ous DOS window/shell is open that had used the desired COM port.
• Verify that no other copies of the upgrade utility are currently running.
• Verify that a straight-through null modem serial cable is used.
• Verify in the selected COM port's Advanced Port settings that the FIFO buffers
are selected and that the receive buffer is set to High.
While upgrading, do not use your computer for anything else or switch be-
tween windows. Close all other windows if necessary. If the upgrade was
unsuccessful (such as during a power outage), repeat the procedure.

5.1.2 Upgrading the KVM s2-Adapter firmware

The KVM s2-Adapters can be upgraded individually or simultaneously.
Do not cycle power to the server or disconnect the KVM s2-Adapter during
this process. A loss of power will render the KVM s2-Adapter inoperable
and require the switch to be returned to the factory for repair.

5.1.2.1 Simultaneously upgrading multiple KVM s2-Adapters

Press Print Screen. The Main dialog box will appear.
Click Commands - KVM series2-Adapter Status. The KVM s2-Adapter Status
dialog box appears.
Figure 23: KVM s2-Adapter Status Dialog Box
Click one or more types of modules to upgrade. Click Upgrade.
The KVM s2-Adapter Upgrade dialog box appears. Click OK to initiate the up-
grade and return to the KVM s2-Adapter Status dialog box.
36
Appendices
590-334-609F