Flash Upgrades; Upgrading The Firmware Using The Kvm S3 Client; Upgrading The Firmware Using The Console Menu - Fujitsu SIEMENS COMPUTERS KVM s3 Serie Bedienungsanleitung

5
5.1
You can use the KVM s3-1621 and KVM s3-1641 appliance Flash upgrade feature to
update the appliances with the latest firmware available. This update can be performed
using the KVM s3 Client or using a Trivial File Transfer Protocol (TFTP) target server.
After the Flash memory is reprogrammed with the upgrade, the KVM s3-1621 or KVM
s3-1641 appliance performs a soft reset, which terminates all KVM-IA sessions. A target
server experiencing a KVM-IA firmware update might not be visible or might be listed as
disconnected. The target server opens normally when the Flash update is completed.
During an upgrade, the KVM-IA status indicator in the OSCAR interface Main window
is yellow.
5.1.1
The preferred method for updating the firmware is to use the KVM s3 Client. See the
KVM s3 Client Installation and User's Guide for detailed instructions. If you do not have
a TFTP server, you can find several shareware and freeware programs on the Internet
that you can download and install.
5.1.2
Go to http://www.fujitsu-siemens.com/support/ and download the latest Flash firm-
ware. Save the Flash upgrade file to the correct directory on the TFTP target
device.
Use the supplied Null-Modem serial cable to connect a computer running terminal
emulation software to the configuration port on the rear panel of the KVM s3-1621
or KVM s3-1641 appliance.The terminal should be set to 9600 bps, 8 bits, 1 stop
bit, no parity, and no flow control.
If the KVM s3-1621 or KVM s3-1641 appliance is not on, turn it on now. After
approximately one minute, press any key to access the Console Main menu.
After the Console Main menu opens, select the Firmware Management option. The
current version of the firmware is opened on the Firmware Management menu.
Type 1 and press Enter to select Flash Download.
Type the IP address of the TFTP server and press Enter.
Type the name of the Flash file and press Enter.
Confirm the TFTP download by typing a y or yes and pressing Enter.
The KVM s3-1621 or KVM s3-1641 appliance will verify that the file you
downloaded is valid.
To confirm the upgrade, type a y or yes and press Enter to confirm.
The KVM s3-1621 or KVM s3-1641 appliance begins the Flash upgrade process.
On-screen indicators show the upgrade progress. After the upload is complete, the
KVM s3-1621 or KVM s3-1641 appliance resets and upgrades the internal
subsystems.
After the upgrade is complete, a verification message is displayed.
590-591-609B
Downloaded from www.Manualslib.com
Appendices

Flash upgrades

Upgrading the firmware using the KVM s3 Client

Upgrading the firmware using the Console menu

manuals search engine
47