Accessing The Switch Dialog Box; Setting The Keyboard Country Code - Fujitsu KVM s2-1602 Bedienungsanleitung

Setting the Keyboard Country Code

4.8.1 Accessing the Switch dialog box

Press Print Screen. The Main dialog box will appear.
Click Setup - Switch. The Switch dialog box appears.
Select either Preemptive or Cooperative as your switch mode.
Figure 22: Switch Dialog Box
4.9 Setting the Keyboard Country Code
Using the keyboard code that supports a language different than that of your KVM
s2-1602/0801 firmware will cause incorrect keyboard mapping.
By defualt, KVM s2-1602/0801 appliances send the US keyboard country code to
the USB modules attached to servers, and the code is applied to the servers when
they are powered up or rebooted. Codes are then stored in the KVM s2-Adapter
Issues may arise when you use the US keyboard country code with a keyboard of
another country. For example, the Z key on a US keyboard is the in the same loca-
tion as the Y key on a German keyboard.
The Keyboard command enables you to send a different keyboard country code
than the default US setting. The specified country code is sent to the all servers at-
tached to the KVM s2-1602/0801 when they are powered up or rebooted, and the
new code is stored in the KVM s2-Adapter.
If the KVM s2-Adapter is moved to a different server, the keyboard country code
will need to be reset.
Only local users can view or change keyboard country code settings.
32
Basic Operations
590-334-609F