Appendices; Flash Upgrades; Upgrading The Kvm S2-0411 Appliance; Upgrading A New Flash File - Fujitsu KVM s2-0411 Bedienungsanleitung

5

Appendices

5.1

Flash upgrades

5.1.1

Upgrading the KVM s2-0411 appliance

Use the KVM s2-0411 appliance Flash upgrade feature to update the appliance with the
latest firmware available.
Items needed for the upgrade
• Target device that is running a terminal program
• Available serial port (COM port) on the target device
• Serial cable that connects the appliance and the target device
• Firmware update
If using IPv4 mode, you may use either a TFTP server or an FTP
server. If using IPv6 mode, you must use an FTP server. To upgrade
the firmware, you need to know the IP address of the server, the
filename of the firmware FLASH file, and, if using an FTP server, the
username and password for the FTP server. You will also need to
make sure that the file is in the appropriate folder.
5.1.2

Upgrading a new Flash file

Go to http://ts.fujitsu.com/support and download the latest Flash firmware. Save the
Flash upgrade file to the correct directory on the applicable FTP or TFTP target
device.
Use the supplied Null Modem serial cable to connect a computer running terminal
emulation software to the configuration port on the rear panel of the KVM s2-0411
appliance. The terminal should be set to 9600 bps, 8 bits, 1 stop bit, no parity, and
no flow control.
If the appliance is not on, turn it on now. After approximately one minute, press any
key to access the Console Main menu.
After the Console Main menu opens, select the Firmware Management option. The
current version of the firmware is opened on the Firmware Management menu.
Type 1 to select FLASH Download (TFTP) or type 2 to select FLASH Download
(FTP).
Type the IP address of the TFTP or FTP target device and press Enter.
Type the name of the Flash file and press Enter.
If using an FTP server, type the FTP server username and password and press
Enter.
To confirm the TFTP or FTP download, type a y or yes and press Enter.
The appliance verifies the downloaded file is valid. To confirm the upgrade, type a y
or yes and press Enter.
590-595-609D
37